Ukr | Rus | Eng

Single-axis laser diameter meter ID-30P

ID-30P with remote terminal

ID-30P with flat cable measuring roller

 

 

 

 

 

 

 

 

 

 

Description:

Single-axis laser diameter meter for cables of small and medium cross sections. The device is designed for contact less measurement of the diameter of cables directly in the process of its production.

 

Appointment and functions of the device:

• Contact less measurement of cable diameter directly in the production process
• Measurement of the external size of products from any materials, including transparent
• Digital display of actual or set diameter value
• Two scalable analog outputs of the absolute diameter and its deviation from the nominal
• An arrow indication diameter deviation from the setpoint
• Diameter limit alarm
• Power on automatically test signal
• Optional RS485 Modbus, Profibus DP


Allows you to measure the outer size of products from any materials, including transparent ones (specify the need to measure transparent materials in the order configurator)

 

Complete set:

• Measuring head ID-30P
• Remote terminal (wall- or flush mounted)

 

Specifications:

Basic parameters 
Diameter measuring range 0,3…36 mm
Scanning frequency 200 1/sec
Laser beam scan speed 166 m/sec
Accuracy ± 2 μm - for min diameter 
± 10 μm - for max diameter
Indication  
Diameter deviation Arrow indicator of the remote terminal
Scale ± 100 μm / ± 500 μm
Max cable lehght for remote terminal 100 m
Actual diameter Digital LED indicator of the remote terminal
Diameter limit alarm Two LED indicators
Interfaces  
Analog outputs

Output 1: ± 10 V, Output 2: 0...10 V
Two scalable analog outputs of the deviation from the nominalCan be used in the automatic diameter stabilization system.

Absolute value of diameter 4..20mA (optional)

Relay outputs Two relay ouputs 220 V 1 А (H and L diameter limits alarm)
Communications
(optional)
RS485 Modbus, Profibus
Power supply  
Voltage 230 V ± 10 %
Frequency 50 Hz ± 5 %
Power consumption 5 VA (measuring head)
5 VA (remote terminal)
Complementary parameters  
Measuring zone 43 х 100 mm
Pass window 100 mm
Body material corrosion resistant duralumin
Degree of protection IP20 (measuring head)
IP40 (remote terminal)

For particularly severe operating conditions (for example, measuring the diameter of the wire during drawing), air channels can optionally be added to the measuring head to purge and create an air barrier from dust, dirt, emulsion and other contaminants entering the device.

This will require the compressed air class 2.4.3. according to ISO 8573-1: 2001) with an excess pressure of 0.05 MPa (0.5 bar).
Operating temperature 0…+40 °С
Overall dimensions (L х W х H) 354х64х133 mm (measuring head)
Weigh 3,6 kg (measuring head)
1,7 kg (remote terminal)
Options  
Modbus RS485 Option board
Інтерфейс Profibus External Profibus DP converter.
The address space corresponds to Sicora meters, which allows quick replacement.
Mounting rack

It reduces installation time on the line. Electrical installation is completed.

Air channel For use in rooms with high dust content: drawing lines, talcum machinery, etc. Significantly increases the work interval between maintenance. Requires advanced air quality preparation.
Reference calibers A set of three calibers of different diameters is designed to check the accuracy of measuring head.

Dimensions:

 

 

Compare »